Filter
Top Products
Creating Labels Using Internal Batch Software
50 DMX 400/430 Operator’s Manual
4. In the sample position, there are two choices:
a. Print a sample label to check data placement by pressing
the Y key for yes. A sample label will print and the
cursor will return to the sample position. At this point,
you can proceed to step b or you can stop the run by
pressing the up arrow key to move the cursor back to
the label name position. Press the F1 key to re-edit your
format in the create/modify label screen.
b. If you do not need a sample, press the N key for ‘no’, or
use the return key. The number of labels you requested
will be printed. After the print job request is sent to the
Printer, the cursor will move back to the label name
position. Additional print jobs can now be sent to the
Printer or you can return to the create/modify label
screen.