Filter
Top Products
Creating Labels Using Internal Batach Software
DMX 400/430 Operator’s Manual 51
3.5 System Maintenance Screen
The third screen, system maintenance, is used to format and copy
memory modules, print test labels, and perform several other
maintenance functions.
To access the screen in the label name position of the create/modify
label screen or print label screen , use ALT-S. The screen will look
like this:
SYSTEM MAINTENANCE
1) TEST AND FORMAT MODULE.
2) COPY MODULE.
3) METRIC ? NO.
4) PRINT TEST LABEL.
5) SYSTEM TEST LABEL.
6) EDIT MODULE NAME.
7) RESET PRINTER.
8) EXIT TO RS-232C SYSTEM.
9) PACK MODULE DATA.
ENTER NUMBER: ________
Figure 3-6 System Maintenance Menu
To exit the screen, press the Esc key. All system maintenance screen
choices are explained below:
Test and Format Module: Used to format or reformat the memory of
a Flash Module. Tests the memory module
to see that it properly functions, and that it
is capable of erasing and loading data.
Warning
This test destroys all existing memory module data!
Follow the prompts to perform the test.