Filter
Top Products
Creating Labels Using Internal Batach Software
DMX 400/430 Operator’s Manual 33
Description Default Range
Heat Factor 10 0 to 20
Print Speed G C-G
Slew Speed K C-K
Dot Pattern Wide 1 1 or 2
Dot Pattern High 1 1 to 3
Label Advance
(Back Feed)
220 Form Edge Offset + 20
Form Edge Offset 220 050 to 999
Row Offset 000 000 to 999
Column Offset 000 000 to 410
Update Count on 01 01 to 99
Max. Label Width 410 050 to 410
Max. Label Length 1200 0500 to 9999
Active Buffers 1 1 or 2
Cut By Amount 0001 0001 to 9999
Edge/Reflective E E or R
Table 3-2 Print Parameters
If ALT-P parameters are changed while in the create/modify label
screen, the changes are saved with the label format. If they are
changed in the print label screen, they are not saved and will affect
only the current print job. Changing parameters in the print label
screen is useful when testing a new label to determine optimum
print parameter settings for that particular format.
F7 and ALT-I: This function is used in the create/modify label
screen to insert a new field description line between
existing field description lines on the screen. It is
especially useful when the repeat function is used
and other lines on the screen are already below the
field to be repeated.