HP (Hewlett-Packard) dv7 4273us Laptop User Manual


 
Playing a CD, DVD, or BD
To play an optical disc:
1. Turn on the computer.
2. Press the release button (1) on the drive bezel to release the disc tray.
3. Pull out the tray (2).
4. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up
over the tray spindle.
NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
5. Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6. Close the disc tray.
If you have not configured AutoPlay, an AutoPlay dialog box appears. You are prompted to select how
you want to use the media content. For more information, see Configuring AutoPlay.
NOTE: For best results, be sure that the AC adapter is connected to an external power source while
playing a BD.
Configuring AutoPlay
To configure AutoPlay:
1. Select Start > Default Programs > Change AutoPlay settings.
2. Confirm that the Use AutoPlay for all media and devices check box is selected.
3. Click Choose a default, and then select one of the available options for each media type listed.
NOTE: Choose HP MediaSmart to play DVDs.
4. Click Save.
For more information about AutoPlay, see Help and Support.
Optical drive 51