HP (Hewlett-Packard) 3500, 3700 Printer User Manual


 
8. Click OK.
9. Print a configuration page. See
Configuration page.
Checking DIMM installation
Check that the DIMMs are installed correctly and working.
To check DIMM installation
1. Turn the printer on. Check that the Ready light is on after the printer has gone through
the startup sequence. If an error message appears, a DIMM may have been incorrectly
installed.
2. Print a configuration page. See
Configuration page.
3. Check the Installed Personalities and Options section on the configuration page and
compare it with the configuration page printed before the DIMM installation.
4. If the amount of recognized memory has not increased:
The DIMM may not be installed correctly. Repeat the installation procedure.
The DIMM may be defective. Try a new DIMM.
ENWW Installing memory and font DIMMs 225