HP (Hewlett-Packard) 3500, 3700 Printer User Manual


 
Menu item Values Description
SHOW ADDRESS AUTO
OFF
AUTO allows the printer's IP address
to be shown on the printer control
panel, alternating with the Ready
message. The default is OFF.
This menu item is displayed only if the
printer is connected to a network
(available for the HP Color LaserJet
3700n, 3700dn, and 3700dtn printer
models).
COLOR/BLACK MIX AUTO
MOSTLY COLOR
PAGES
MOSTLY BLACK
PAGES
This menu item establishes how the
printer switches from color to
monochrome (black and white) mode
for maximum performance and print
cartridge life.
AUTO will reset the printer to the
factory default setting. The default is
AUTO.
Select MOSTLY COLOR PAGES if
nearly all of your print jobs are color
with high page coverage.
Select MOSTLY BLACK PAGES if
you print mostly monochrome print
jobs, or a combination of color and
monochrome print jobs.
TRAY BEHAVIOR USE
REQUESTED
TRAY
MANUALLY
FEED PROMPT
PS DEFER
MEDIA
Allows you to specify settings for the
tray selection behavior. (This setting
allows you to configure the trays to
behave like trays in some previous HP
printers.)
The default for USE REQUESTED
TRAY is EXCLUSIVELY.
The default for MANUALLY FEED
PROMPT is ALWAYS.
PS DEFER MEDIA affects how paper
is handled when printing from an
Adobe PS print driver. ENABLED uses
HP's paper handling. Disabled uses
the Adobe PS paper handling. The
default is ENABLED.
See
Tray behavior options: use
requested tray and manually feed for
more information.
POWERSAVE TIME 1 HOUR
2 MINUTES
30 MINUTES
4 HOURS
15 MINUTES
15 HOURS
Reduces power consumption when the
printer has been inactive for an
extended period.
Allows you to set the length of time the
printer remains inactive before going
into PowerSave mode. The default is
30 MINUTES.
See
PowerSave time for more
information.
ENWW Configure device menu 35