Filter
Top Products
5. Press to select SYSTEM SETUP.
6. Press
to highlight TRAY BEHAVIOR.
7. Press
to select TRAY BEHAVIOR.
8. Press
to highlight MANUALLY FEED PROMPT.
9. Press
to select MANUALLY FEED PROMPT.
10. Press
or to select ALWAYS or UNLESS LOADED.
11. Press
to set the behavior.
12. Press M
ENU
.
PowerSave time
The adjustable PowerSave time feature reduces power consumption when the printer has
been inactive for an extended period. You can set the length of time before the printer goes
into PowerSave mode to 1 HOUR, 2 MINUTES, 30 MINUTES, 4 HOURS, 4 HOURS, 15
MINUTES, or 15 HOURS. The default setting is 30 MINUTES.
Note
The printer display appears dimmed when the printer is in PowerSave mode. PowerSave
mode does not affect printer warm-up time, unless the printer is in PowerSave mode for more
than 8 hours.
To set PowerSave time
1. Press M
ENU
to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight POWERSAVE TIME.
7. Press
to select POWERSAVE TIME.
8. Press
or to select the appropriate time period.
9. Press
to set the time period.
10. Press M
ENU
.
To disable or enable PowerSave
1. Press M
ENU
to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight RESETS.
5. Press
to select RESETS.
6. Press
to highlight POWERSAVE.
7. Press
to select POWERSAVE.
8. Press
or to select ON or OFF.
ENWW Changing printer control panel configuration settings 41