Filter
Top Products
Front Panel, Model L10 Long-Wave Hub 15
Product Description
Front Panel, Model L10 Long-Wave Hub
The front panel contains LEDs for monitoring power, fault, and port status. The long-wave
port is between port 9 and the 10Base-T port. The RS-232 port is provided to configure and
troubleshoot the hub and to upgrade its firmware. The 10Base-T port provides an ethernet
connection if you choose to manage the hub with Fibre Channel Manager.
The Reset button resets the internal control microprocessor of the hub. Pushing the Reset
button also forces loop initialization on all devices in the loop.
Figure 2 Front Panel Display, Long-Wave Hub
1 Power LED 7 FC-AL long-wave port and Port LED
2 Fault LED 8 10Base-T port
3 Reset button 9 10Base-T Status LED
4 Fibre Channel connector (Port 1 indicated) 10 MAC address
5 Port LED (Port 1 indicated) 11 RS-232 port
6 FC-AL short-wave ports and Port LEDs 12 AC power connector
1
2
3
4
6
8
10
11
12
5
7
9