Filter
Top Products
Procedure 6: Connect FC-AL Devices 39
Installation
If the hub is to be connected to an FC-AL adapter that is connected to another FC-AL
device, follow the removal procedures in the document that came with the FC-AL
device before disconnecting the device’s cable.
If the hub is to be connected to an FC-AL device that is connected directly to a server,
follow the removal procedures in the document that came with the FC-AL device
before disconnecting the device’s cable.
When installing model L10 long-wave hubs in a cascaded topology, make sure the
long-wave port is connected only to the long-wave port on another long-wave hub.
3. For the model L10 long-wave hub, connect the long-wave loopback cable to the
long-wave port if the port is not in use.
4. Install any special files the FC-AL devices need. Refer to the device manual for details.