Filter
Top Products
Procedure 4: Mount the Hub into a Rack (Optional) 29
Installation
7. Repeat step4 through step6 to install the right rail.
8. Position the hub in the rack. Align the hole in each mounting ear bracket with the holes
in the assembled rail, nut, and column.
9. Insert a 10–32 x .625 machine screw through the mounting ear bracket, rail, nut, and
column on each side of the hub (Figure10). Tighten the screws.
Figure 10 Installing the Hub into the Rack
10. Slide the plenum shroud into the front side of the rack. Align the holes in the plenum
shroud brackets with the holes in the assembled rails and outer posts.