Filter
Top Products
60 Enabling Hub Management
4. From the Main menu, enter 3 (Management options) to display the Management
Options menu:
Management options Menu:
1. Return to Main Menu
2. Set SNMP get community name
3. Set SNMP set community name
4. Set SNMP trap community name
5. Set SNMP trap server IP addresses
6. Set MIB-2 sysname
7. Restore default values to SNMP get, set, trap community names
8. Clear SNMP trap server IP address list
5. Enter 5 to set the IP address(es) where you want Fibre Channel Manager to send traps
(optional). The Set Trap IP address Menu appears.
6. Type the trap server IP address, then press <ENTER>.
To enter additional addresses, repeat step 6. You can enter up to four IP addresses.
To delete an existing trap server IP address, enter the value of the existing IP address.
7. Enter 1 to return to the Management Options menu.
8. Enter 6 to set the MIB-2 sysname (optional). The SNMP MIB-2 sysName Menu appears.
9. Type a unique name for the hub, then press <ENTER>.
10. Enter 1 to return to the Management Options menu, then enter 1 again to return to the
Main menu.
Configuring Cascaded Hubs
By default, HP SureStore E hubs are configured as parent hubs. However, you can connect
two hubs in a cascaded configuration in which one hub (the parent) is connected to the
LAN (ethernet) and the other hub (the child) is connected to the parent hub. For
information about setting up a cascaded hub configuration, see page18 and page32.