Filter
Top Products
Updating the Hub Firmware 55
RS-232 Interface
Functions
3. For the model S10 short-wave hub, enter: HP A3724A FC-AL Shortwave Hub
For the model L10 long-wave hub, enter: HP A4839A FC-AL Longwave Hub
The Set sysDescr string Menu appears with the new setting. (The following example is
for the short-wave hub.)
Set sysDescr string Menu: [current = HP A3724A FC-AL Shortwave Hub]
1. Return to Manufacturing Settings Menu
or enter new sysDescr string
>
4. Verify that the setting is correct, then enter 1 to return to the Manufacturing Settings
Menu.
Manufacturing Settings Menu:
1. Return to Main Menu
2. Set sysdescr [current = HP A3724A FC-AL Shortwave Hub]
3. Set system OID [current = 1.3.6.1.4.1]
4. Toggle port bypass persistence mode [current = Enabled]
>
5. Enter 3 to display the Set System OID Menu.
Set System OID Menu: [current = 1.3.6.1.4.1]
1. Return to Manufacturing Settings Menu
or enter new system OID suffix in dotted decimal format
The suffix entered will be appended to 1.3.6.1.4.1
example: if desired system OID is 1.3.6.1.4.1.2.3.4, then enter
2.3.4
>
6. Enter 11.2.3.7.5.10