HP (Hewlett-Packard) L10 Switch User Manual


 
2
Notice
© Hewlett-Packard Company, 1997, 1998, 1999.
All rights reserved.
Hewlett-Packard Company makes no warranty of
any kind with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
Hewlett-Packard shall not be liable for errors
contained herein or for incidental or consequential
damages in connection with the furnishing,
performance, or use of this material.
This document contains proprietary information,
which is protected by copyright. No part of this
document may be photocopied, reproduced, or
translated into another language without the prior
written consent of Hewlett-Packard. The
information contained in this document is subject to
change without notice.
Warranty
If you have any questions about the warranty for
this product, contact your dealer or local Hewlett-
Packard sales representative.
Trademark Information
HyperTerminal is a registered trademark of
Hilgreave, Inc.
Windows and Windows NT are either a registered
trademark or trademark of Microsoft Corporation in
the United States and/or other countries.
Safety Instructions
Grounding
This product is a safety class I product and has a
protective earthing terminal. There must be an
uninterruptible safety earth ground from the main
power source to the products input wiring
terminals, power cord, or supplied power cord set.
Whenever it is likely that the protection has been
impaired, disconnect the power cord until the
ground has been restored.
Service
Any servicing, adjustment, maintenance, or repair
must be performed only by authorized service-
trained personnel.
Format Conventions
Denotes
WARNING A hazard that can cause
personal injury
Caution A hazard that can cause hardware
or software damage
Note Significant concepts or operating
instructions
this font Text to be typed verbatim: all
commands, path names, file
names, and directory names
this font Text displayed on the screen
<ENTER> Keys to be pressed, for example,
the <ENTER> key