Filter
Top Products
Controls and Indicators on the CTL700 Tape Library
L700 (CTL700) Installation and User’s Guide—527338-004
4-4
Display Screens
In addition, the display screens must be used to:
•
Export cleaning cartridges through the CAPs
•
Run diagnostic tests
The next subsections describe the tape library’s main screens.
Tape Library Status
The Library Status screen is an information-only screen. It is the first screen to appear
on the operator panel after an IPL. The screen displays the status of the CAPs, the
activity of the tape library, and the status of the installed tape drives. Figure 4-2 shows
an example of the Library Status screen.
Push the Menu button from the Library Status screen to access the Main menu.
FSC Logs
Accessible from the Main menu, the FSC Logs screen displays all fault symptom codes
(FSCs), the number of occurrences, and the date and time of the last occurrence. You
can scroll through to display the last 20 events. Figure 4-3 shows an example of the
FSC Logs screen.
Figure 4-2. Library Status Screen
Note. These statements apply to the Event Log screen:
1. Events listed in the event log might be failures. All events are recorded.
2. FSCs are generated for both tape library and drive errors.