Filter
Top Products
Configuring and Testing the Tape Library
L700 (CTL700) Installation and User’s Guide—527338-004
5-7
Setting Screen Characteristics
3. At the editing screen:
a. Use the up and down arrow buttons to select a value for each portion (field) of
the date.
b. Use the SELECT button to move right to the next field.
c. Use the MENU button to move left to the previous field.
4. When the screen displays the desired setting, press the SELECT button from the
right-most field to save entries. Press the MENU button to abort.
5. To set other values, continue with the next subsection.
Setting the Time
1. From the LIBRARY CONFIG screen, line up the cursor with TIME.
2. Press the SELECT button. An editing screen appears.
3. At the editing screen:
a. Use the up and down arrow buttons to select a value for each portion (field) of
the time.
b. Use the SELECT button to move right to the next field.
c. Use the MENU button to move left to the previous field.
4. When the screen displays the desired setting, press the SELECT button from the
right-most field to save entries. Press the MENU button to abort.
5. To set other values, continue with the next subsection.
Setting Screen Characteristics
To change the contrast and backlight (brightness) of the operator screens:
1. From the LIBRARY CONFIG screen, line up the cursor with DISPLAY INFO.
2. Press the SELECT button. The display screen appears.
3. Use an arrow button to select the desired screen characteristic: CONTRAST or
BACKLIGHT. An edit screen appears.
4. On the editing screen, use the up and down arrow buttons to save the changes.
Press the MENU button to abort.
5. When the count value is correct, press the SELECT button to save the changes.
Press the MENU button to abort.
6. To set other values, continue with the next subsection.