Filter
Top Products
Getting started
Scenario 1: Connecting wired devices to a wireless network
2-3
The MSM AP is operating in autonomous mode in its factory-default configuration. (As
such, it obtains an IP address of 5.25 from the DHCP server and creates a wireless
network call HP ProCurve.) Install the MSM AP as described in its Quickstart.
The wired computers are configured to obtain their IP addresses automatically (DHCP
clients).
Configuration procedure
Configuration of the M111 occurs via its Web-based management tool. To access this tool you
need a computer running at least Microsoft Internet Explorer 7/8 or Firefox 3.x.
Note Do not power on the M111 until directed.
A. Configure your computer
1. Configure the LAN port on a computer to use the static IP address 192.168.1.2 with a
subnet mask of 255.255.255.0. Set the default gateway to 192.168.1.1, and DNS server
to 192.168.1.1.
For example, in Windows XP, select Control Panel > Network Connections > Local
Area Connection > Properties > Internet Protocol (TCP/IP) > Properties.
2. Disable any wireless connection.