Filter
Top Products
Working with the M111
Management tool
3-3
Management tool
The management tool is a web-based interface to the M111 that provides easy access to all
configuration and monitoring functions.
The computer used to connect to the management tool must:
Have at least Microsoft Internet Explorer 7/8 or Firefox 3.x.
Be able to establish an IP connection with the AP.
Starting the management tool
To launch the management tool, specify the following in the address bar of your browser:
https://M111_IP_address
The factory default IP address is 192.168.1.1.
About
passwords
The default username and password is admin. New passwords must be 6 to 16 printable
ASCII characters in length with at least 4 different characters. Passwords are case sensitive.
Space characters and double quotes ( “ ) cannot be used. Passwords must also conform to the
selected security policy as described in Security policies on page 3-6.
For information on starting the management tool for the first time, see the M111 Quickstart
Guide available at www.hp.com/go/procurve/manuals.
A security certificate warning is displayed the first time that you connect to the management
tool. This is normal. Select whatever option is needed in your Web browser to continue to the
management tool. The default certificate provided with the M111 will trigger a warning
message on most browsers because it is self-signed. To remove this warning message, you
must replace the default certificate. See About certificate warnings on page 3-43.