Filter
Top Products
Regulatory information
A-4
2.4 GHz Operation
This device may be operated indoors or outdoors in all EU and EFTA countries using the
2.4 GHz band (Channels 1 - 13), except where noted below.
In France, this device may use the entire 2400 - 2483.5 MHz band (Channels 1 through 13)
for indoor applications. For outdoor use, only the 2400 - 2454 MHz frequency band
(Channels 1 through 9) may be used. For the latest requirements, see
http://www.art-telecom.fr.
L'utilisation de cet equipement (2.4 GHz wireless LAN) est soumise à certaines
restrictions: cet equipement peut être utilisé à l'interieur d'un batiment en utilisant toutes
les frequences de 2400 a 2483.5 MHz (Chaine 1-13). Pour une utilisation en
environnement exterieur, vous devez utiliser les frequencies comprises entre 2400 a 2454
MHz (Chaine 1-9). Pour les dernières restrictions, voir http://www.art-telecom.fr.
5 GHz Operation
This device requires the user or installer to properly enter the current country of
operation in the 5 GHz Radio Configuration Window,
This device will automatically limit the allowable channels determined by the current
country of operation. Incorrectly entering the country of operation may result in illegal
operation and may cause harmful interference to other systems. The user is obligated to
ensure the device is operating according to the channel limitations, indoor/outdoor
restrictions and license requirements for each European Community country as
described in this guide.
This device employs a radar detection feature required for European Community and
EFTA country operation in the 5 GHz band. This feature is automatically enabled when
the country of operation is correctly configured for any European Community or EFTA
country. The presence of nearby radar operation may result in temporary interruption of
operation of this device. The radar detection feature will automatically restart operation
on a channel free of radar.
This device is restricted to indoor use when operated in EU and EFTA countries using
the 5.15-5.35 GHz band (Channels 36, 40, 44, 48, 52, 56, 60 and 64). See the table below for
the allowed 5 GHz channels in each band.
Operation Using 5 GHz Channels in the European Community
The user/installer must use the provided configuration utility to check the current channel of
operation and make necessary configuration changes to ensure operation occurs in
conformance with European National spectrum usage laws as described below and
elsewhere in this guide.
Frequency
Band (MHz)
Allowed Channels Usage
Maximum
EIRP (mW)
5150 - 5250 36, 40, 44, 48 Indoor use only 200
5250 - 5350 52, 56, 60, 64 Indoor use only 200