Filter
Top Products
Getting started
Scenario 3: Connecting a serial device to a wireless network
2-12
Configuration procedure
The initial configuration steps for this scenario are the same as for Scenario 1. For each step
see the instructions on the indicated page.
A. Configure your computer
See Configure your computer on page 2-3.
B. Connect to the M111
See Connect to the M111 on page 2-4.
C. Start the M111
See Start the M111 on page 2-4.
D. Connect to the management tool and login
See Connect to the management tool and login on page 2-4.
E. Set the M111 IP address
See Set the M111 IP address on page 2-5.
F. Configure a station profile
See Configure a station profile on page 2-6.
G. Configure the serial connection
1. Connect the serial device to the serial port on the M111 using a straight-through serial
cable. (For serial port specifications, see Serial port connector on page 3-24.)
2. Select Network > TCP Serial. The TCP to serial configuration page opens.