Filter
Top Products
Working with the M111
Configuring Quality of Service (QoS)
3-22
IP QoS
This option lets you assign traffic to the queues based on the criteria in one or more IP QoS
profiles. Each profile lets you target traffic on specific ports or using specific protocols. For
more information, see Creating IP QoS profiles on page 3-22.
Disabled
When QoS traffic prioritization is disabled, all traffic is sent to queue 3.
Upstream DiffServ tagging
Enable this option to have the M111 apply differentiated services marking to upstream traffic.
Layer 3 upstream marking ensures end-to-end quality of service in your network. Data
originating on the wireless network can now be carried throughout the network (wireless
and wired) with a consistent quality of service and priority. This feature is enabled by default.
Creating IP QoS profiles
IP QoS profiles enable you to define custom rules for classifying traffic based on port and
protocol values. IP QoS profiles can be assigned to a station profile when the Priority
mechanism is set to IP QoS.
To define an IP QoS profile
1. Select Network > IP QoS. Initially, no profiles are defined.
2. Select Add New Profile.
3. Configure parameter settings as follows: