Filter
Top Products
Resetting to factory defaults
How it works
B-2
How it works
Caution Resetting the M111 to factory defaults deletes all configuration settings, resets the manager
username and password to “admin”, and enables the DHCP client. If no DHCP server assigns
an address to the M111, its address defaults to 192.168.1.1.
Using the Reset button
Using a tool such as a paper clip, press and hold the reset button for a few seconds until the
front status lights blink three times.
Using the management tool
1. Launch the management tool (default https://<IP address of the M111>).
2. Select Maintenance > Config file management.
3. Under Reset configuration, select Reset.