Filter
Top Products
186 Chapter 10
Scan test
Running the est GUI
Running the est GUI
The est GUI may be started at the command prompt. The following is
the est command usage:
/spp/bin/est [-option] node_number
As an example to bring up the GUI and test node 0, enter the following
command:
% /spp/bin/est -x 0
Table 77 on page 200 provides a complete list of options.
Figure 46 shows the est main window.
Figure 46 est main window
The main window has two sections. The upper section has two rows of
buttons. The top row provides the user several options to control system
and test parameters, and the bottom row allows the user to run all
available tests. The lower section is the main window pane that displays
messages and test status.