Filter
Top Products
2-22 Removal and Replacement HP Omnibook XT6050, XT/VT6200
Figure 2-15. Removing the Top Case
Reassembly Notes
•
To reinstall the sound/IR panel, insert the tabs on the ends of the panel into the slots in the bottom
case.
•
When reinstalling the right corner cover, first insert the tab at the back end of the cover into the
case, then slide the plug-in module latch forward and snap the cover over the latch and into place.
•
Wireless models only:
If you are replacing the rear antenna PCA, place the PCA in its position
near the left hinge, replace the screw, then thread the cable through to the bottom of the computer
and reconnect the cable to the mini-PCI card.
Screws,
M2.5x4mm (2)
PCMCIA doors
Screws,
M2.5x8mm (4)
Screws, M2.5x4mm (2)
Cover,
right corner
Sound/IR
panel
Left corner
cover
Screw,
M2.5x2mm
Wireless antenna
Touch pad
flex cable
Screws,
M2.5x6mm (3)
Screw,
M2.5x17mm
Screw,
M2.5x6mm
Screw,
M2.5x4mm
Docking doors
(OB 6050 models only)