Filter
Top Products
HP Omnibook XT6050, XT/VT6200 Troubleshooting and Diagnostics 3-31
Security Menu Description Default
User Password is Shows if a user password is set. Clear
Administrator Password is Shows if an administrator password is set. Clear
Set User Password Press Enter to set, change, or clear the user password. The
password can have no more than 8 characters (0-9, A-Z), and
cannot include special or accented characters.
Enter
Set Administrator
Password
Press Enter to set, change, or clear the administrator
password, which protects BIOS Setup settings. The password
can have no more than 8 characters (0-9, A-Z), and cannot
include special or accented characters.
Enter
Smart Card Security Enables Smart Card user validation instead of the password
scheme. This field appears only if Smart Card Security has
been enabled by HP Smart Card software in Windows.
Enabled
Password Required to
Boot Sets whether a user password is required when the computer
boots. Requires the administrator password for changes.
Enabled
Internal hard disk drive
lock
Encodes the current user password (or administrator
password if that is the only password set) on the hard disk
drive.
Disabled
Removable Device Boot Sets whether the computer will attempt to boot from a floppy
drive or other removable device.
Enabled
Power Menu Description Default
Backlight Control When switching to battery power, sets whether the display
brightness reverts to the previous battery-power brightness
(Auto Restore) or to a very low brightness to save power
(Auto Dim).
Auto Restore
Auto Suspend on Undock* Sets whether the computer suspends to Standby power mode
after undocking.
When Lid Closed
Auto Turn-On on Dock* Sets whether the computer turns on after docking. Enabled
Boot Menu Description Default
+Hard Disk
+Removable Device
CD-ROM/DVD Drive
Internal NIC
Shows the order of boot devices, with “+” indicating a device
category. Move the entries to change the order. If the
computer has more than one device in a category, you can
select the one scanned. Internal NIC provides diskless boot
from a network server.
1. Hard Disk
2. Removable
Device
3. CD-ROM/
DVD drive
4. Internal NIC
Exit Menu Description
Save Changes and Exit Saves Setup changes, then exits and reboots.
Discard Changes and Exit Discards any Setup changes made since last save, then exits
and reboots. Does not affect password, date, or time changes.
Get Default Values Restores default settings, and remains in Setup. Does not
affect password, date, or time changes.
Load Previous Values Discards any Setup changes made since last save, and
remains in Setup. Does not affect password, date, or time
changes.
Save Changes Saves Setup changes, and remains in Setup. Security
settings are saved when changed.