Technology Code ID) Removal and Replacement 2-33
5. Remove both retaining screws from the motherboard.
6. Remove the four standoffs located near the CPU module.
7. Disconnect the audio PCA and remove it from the motherboard.
8. Lift the front edge of the motherboard slightly, then carefully lift the motherboard forward and out
of the bottom case.
Figure 2-23. Removing the Motherboard
Reassembly Procedure
• When reinstalling the motherboard, see “Reinstalling the Motherboard” on page 2-34.
• When reinstalling the bottom case, see “Replacing the Bottom Case” on page 2-35.
Screws, M2×4mm (2)
Screws,
M2.5x6mm (3)
Screws,
M2.5x6mm (2)
Screw,
M2.5x6mm
Screws,
M2×4mm (2)
Standoffs,
5mm (4)