Filter
Top Products
Technology Code ID) Removal and Replacement 2-37
Removing Notebook Components
(HP Authorized Service Providers Only)
Required Equipment
• #0 Phillips screwdriver.
• Small flat-blade screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove the assemblies and follow the additional steps given in the table below.
Table 2-5. Removing Notebook Components
Component Removal Procedure Additional Steps
Antenna, wireless
See page 2-20.
Bezel, display
See page 2-20.
Card, mini-PCI
See page 2-16.
Case, bottom
See page 2-32.
Case, top
See page 2-27.
Cover, keyboard
See page 2-9.
Display assembly
See page 2-18.
Doors, docking
Plug-in module (page 2-5).
Hard disk drive (page 2-6).
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
SDRAM modules
(page 2-13).
Mini-PCI card (page 2-16).
Display assembly
(page 2-18).
Fan and heatsink
(page 2-22).
CPU module (page 2-25).
Top case (page 2-27).
Hinge saddles
(page 2-30).
Motherboard (page 2-32).
See Figure 2-24 on page 2-35.