Filter
Top Products
1 - 4
The exposure standard for wireless mobile phones employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/Kg. Although the SAR is deter-
mined at the highest certified power level, the actual SAR level of the phone while operating can be well
below the maximum value. This is because the phone is designed to operate at multiple power levels so
as to use only the poser required to reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
For this device, the highest reported SAR value for usage against the head is 0.73 W/kg, for usage near
the body is 0.73 W/kg.
While there may be differences between the SAR levels of various phones and at various positions, they
all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone
is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid
after searching on FCC ID: HD560SLU.
SAR compliance for body-worn operation is based on a separation distance of 1.5cm between the unit
and the human body. Carry this device at least 1.5cm away from your body to ensure RF exposure level
remains at or below the maximum levels. To support body-worn operation, choose the belt clips or
holsters, which do not contain metallic components, to maintain a separation of 1.5cm between this
device and your body. RF exposure compliance with any of body-worn accessory, which contains metal,
was not tested and certified, and use such body-worn accessory should be avoided.
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and
has been tested in accordance with the measurement methods and procedures specified in IEEE 1528.
This equipment should be installed and operated with minimum distance 1.5cm between the radiator
and your body.
CE SAR Compliance
This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public
to electromagnetic fields by way of health protection.
The limits are part of extensive recommendations for the protection of the general public. These recom-
mendations have been developed and checked by independent scientific organization through regular
and thorough evaluation of scientific studies. The unit of measurements for the European Council’s
recommended limit for mobile devices is the “Specific Absorption Rate” (SAR), and the SAR limit is
2.0W/kg averaged over 10 gram of tissue. It meets the requirements of the International Commission on
Non-Ionizing Radiation Protection (ICNIRP).
The highest reported CE stand alone SAR values for head, body-worn accessory conditions are: 0.716
W/kg (10g), 0.741 W/kg (10g).
For body worn operation, this device has been tested and meets the ICNIRP exposure guidelines and
the European Standard EN 62311 and EN 62209-2, for use with dedicated accessories. SAR is
measured with this device at a separation of 1.5cm to the body, while transmitting at the highest certified
output power level in all frequency bands of this device. Use of other accessories which contain metals
may not ensure compliance with ICNIRP exposure guidelines.