Filter
Top Products
Chapter 1 — About the Computer Features
12 Thor CV31 Vehicle-Mount Computer User Manual
Disable Backup Battery Charging
If you use the CV31 in a cold environment for an extended period of time,
the backup battery temperature may fall below the required temperature
for charging (0 °C, 32 °F). To prevent data loss, the default state of the
CV31 is to not start if the backup battery does not have sufficient charge.
If you need to start a CV31 that has a low battery but is connected to
external power in a cold environment, you can disable this setting.
1 Start Intermec Settings.
2 Tap Device Settings > Boot Charging Options.
3 Select Disable charging during startup.
How to Mount the CV31
Use a Honeywell approved mounting accessory to mount the CV31:
• Desktop Mounting Kit (P/N 805-815-001)
• Vehicle Mounting Kit with a 1.5-inch (C-size) (P/N 805-813-001) or
2.25-inch (D-size) (P/N 805-814-001) RAM ball
• Wall Mounting Kit (P/N VE011-2006)
• Mounting Screw Kit (P/N 213-043-001) to mount the CV31 to an
existing 1.5-inch (C-size) or 2.25-inch (D-size) RAM ball
How to Connect a Scanner
You can connect a scanner to the computer with one of these connectors:
• Serial
• USB
You can also connect a Bluetooth scanner through Bluetooth
communications.
Caution: If the CV31 is disconnected from external power and the
backup battery does not have sufficient charge, data may be lost or
corrupted.
Note: Power to the COM ports is disabled when power is not supplied to
the CV31 (the vehicle is turned off).