Filter
Top Products
Chapter 3 — Configure the Computer
38 Thor CV31 Vehicle-Mount Computer User Manual
Configure the Computer Remotely with
SmartSystems
You can use Intermec Settings from a SmartSystems console to remotely
configure all the Intermec computers. For help using Intermec Settings,
click Help > Contents. For information on all the parameters in Intermec
Settings, see the Intermec Settings Command Reference Manual.
1 In the SmartSystems console, select a computer and then right-click
on it. A list appears.
2 Select Start Intermec Settings.
3 Configure the settings you want to change. As you select parameters,
help for each parameter appears in the upper right pane.
4 When you are done making changes, select File > Save Settings.
About Network Communications
You can use the mobile computer in your wireless or wired data collection
network. You can connect your computer using:
• 802.11 radio communications.
• Ethernet communications.
• Bluetooth communications.
• USB and serial communications.
About 802.11 Radio Communications
The computer has an 801.11a/b/g/n radio to transfer data using wireless
communications. Before you configure radio communications, you need
to set up your wireless network, including your access points.
About Bluetooth Communications
The computer is Bluetooth-enabled, which lets you connect to these
Bluetooth devices:
• Scanners
• Printers
• Audio devices
• Wireless readers