Filter
Top Products
Appendix B — Device Settings
74 Thor CV31 Vehicle-Mount Computer User Manual
Scanner Settings
Scanner Setting Default Value
Tethered Scanner (COM1) Scanner
Model
SR Intermec Scanner
Tethered Scanner (COM3) Scanner
Model
ASCII
Trigger Mode Level
Aimer Mode Typical aimer
Hardware Trigger Enable
Trigger Timeout (sec) 2
Aiming Duration (msec) 500
Turn Off After Good Read Enable/One-shot
Number of Good Read Beeps 1
Energy Saver Mode Disable
Imager Settings
Imager Setting Default Value
Predefined Modes 1D and 2D Standard
Sticky Aimer LED Duration 0
Imager Decode Mode 2D Imager
Lighting Mode Illumination LED Priority
Lighting Goal 40
Top Position 0
Bottom Position 479
Illumination Level 100
Initial 1D Search Area Smart Raster
Enable Direct Product Marking (DPM)
Mode
Enable
Enable DPM Automatice Exposure
Control (AEC)
Enable
AEC area Small (center)
Damaged 1D Codes Disable
Image File Location \My Documents\MDI