Filter
Top Products
Chapter 1 — About the Computer Features
18 Thor CV31 Vehicle-Mount Computer User Manual
Configure the Bar Code Slot Reader
If you installed the bar code slot reader (Model AR3) accessory, you need
to enable and configure it before you can use it.
1 Start Intermec Settings.
2 Tap Data Collection > Tethered Scanner (COM1 or COM3) >
Scanner Settings.
3 Tap Scanner Model.
4 From the list, select ID Tech Slot Scanner.
5 Select Enable Scanner Port.
6 Tap OK.
7 Tap Data Collection > Tethered Scanner (COM1 or COM3) >
Symbologies.
8 Only enable the symbologies that you plan to read.
Install a microSD Card
Use a microSD card to increase file storage or install software. The
computer resets when you install or remove a microSD card.
1 To turn off the computer, press the Power button and tap Suspend.
2 Disconnect the power cord from the computer.
3 Use a Phillips screwdriver to remove the six screws that secure the
cover.
(x6)