Filter
Top Products
Chapter 3 — Configure the Computer
42 Thor CV31 Vehicle-Mount Computer User Manual
5 To import user and root certificates from a Microsoft IAS server:
a Tap Web Enrollment.
b To log on to the server, enter the User, Password, and Server (IP
Address).
c Tap OK.
d When you are prompted to load the root certificate, tap OK.
e When the message box appears to let you know the certificate has
been added, tap OK.
Select a Funk Security Profile
You can define up to four profiles for Funk security. Different profiles let
your computer communicate in different networks without having to
change all your security settings. For example, you may want to set up
one profile for the manufacturing floor and one for the warehouse. By
default, the active profile is Profile 1.
1 Start Intermec Settings.
2 Select Communications > 802.11 Radio > Funk Security.
3 Tap a profile to expand it.
4 (Optional) In the Profile Label text box, enter a meaningful name for
your profile.
5 Configure your security settings. For help, see the next sections.
6 Repeat Steps 3 through 5 for each profile you want to define.
7 To set the active profile, tap Active Profile and select a profile from
the list.
8 Save your settings.
Configure WPA or WPA2 Enterprise (802.1x)
Security with Funk Security
Before you set WPA-802.1x or WPA2-802.1x security with Funk, you
need to configure your authentication server and authenticators. To use
TLS protocol, you also need to load a user and root certificate. On your
computer, you need to enable the radio and set the date.
1 Start Intermec Settings.
2 Select Communications > 802.11 Radio > Funk Security.
3 Select a Funk security profile to configure.