Filter
Top Products
User Manual - Configuration Guide (Volume 3)
Versatile Routing Platform
Chapter 1
DDR Configuration
1-20
Table DC-1-34 Configure cyclic use of dialer map
Operation Command
Enter the configuration mode of the dial interface
(used in global configuration mode)
interface interface-type interface-number
Configure dialer map (used in the configuration mode
of the dial interface)
dialer map protocol next-hop-address name hostname
dialerstring [: isdn subaddress]
Configure several other dialer maps oriented to the
same destination network layer address and using
different dial strings (used in the configuration mode of
the dial interface)
dialer map protocol next-hop-address name hostname
dialerstring [: isdn subaddress]
1.5 Monitoring and Maintenance of DDR
In any configuration mode, the following command can be used to display dial interface
information, thus monitoring and maintaining DDR.
Table DC-1-35 Display DDR interface information
Operation Command
Display dial interface information show dialer [interface interface-type interface-number]
For example:
Quidway# show dialer interface serial 1
The system displays:
Serial1 - dialer type = Serial
NextHop_address Dialer_Strings Successes Failures Max_call
Last_call
100.1.1.1 8888
Idle timer (120 secs), Fast Idle timer (20 secs)
Wait for carrier (60 secs), Re_enable (20 secs)
The above includes dialer map table at the interface and such information as the
configuration of DDR features. Specific items are explained in the following table.
Table DC-1-36 Description of the display information items of show dialer command
Name Meaning
NextHop_address
The address of the remote end corresponding to a Dialer
map at the interface
Dialer_Strings Dial string corresponding to the Dialer map
Successes Number of Dialer map call successes
Failures Number of Dialer map call failures
Max_call The maximum time Dialer map is used
Last_call The time Dialer map is used for the last call
Idle timer The time set by Dialer idle-timeout command
Fast Idle timer The time set by Dialer fast-idle command
Wait for carrier The time set by Dialer wait-for-carrier-time command
Re_enable The time set by Dialer enable-timeout command