Filter
Top Products
User Manual - Configuration Guide (Volume 3)
Versatile Routing Platform
Chapter 1
VoIP Configuration
1-14
}
The above information indicates that the call control block 1 serves as outgoing call, the
state of each module is connection established, the call state is in call process, the
calling number is 111 and the called number is 660010.
RCV : CCB [ 2 ]
{
CallID : 0x0042
CallState : TALK
IppID : 0x004e
IppState : IPPS_CONNECTED
CcID : 0xffff
CcState : CCS_CONNECTED
VpmID : 0x0039
CallType : INCOMING
CallAttribute : 0x00000000
CallSignaling : 0x00000004
EncodeType : 0x00000009
E1Slot : 0xffffffff
E1Port : 0xffffffff
TimeSlot : 0xffffffff
ChannelID : 0x00000000
VpuState : VS_CONNECTED
IppTimer : 0x00000000
CcTimer : 0x00000000
VpuTimer : 0x00000000
CcChanMsg : 0x00000000
E1ChanMsg : 0x00000000
CallerNumber : 111
CalledNumber : 660010
prev : 0x01409000
next : 0x00000000
}
The above information indicates that the call control block 2 serves as incoming call,
the state of each module is connection established, the call state is in call process, the
calling number is 111 and the called number is 660010.
4) Display the call statistic information between the RCV module and other modules
Quidway# show rcv statistic call
Statistic about RCV calls :
{
RCV_CC_ACTIVE_CALL : 0
RCV_CC_ACTIVE_CALL_SUCCEEDED : 0
RCV_CC_ACTIVE_CALL_FAILED : 0
RCV_CC_PASSIVE_CALL : 0
RCV_CC_PASSIVE_CALL_SUCCEEDED : 0
RCV_CC_PASSIVE_CALL_FAILED : 0
RCV_R2_ACTIVE_CALL : 5
RCV_R2_ACTIVE_CALL_SUCCEEDED : 2
RCV_R2_ACTIVE_CALL_FAILED : 3
RCV_R2_PASSIVE_CALL : 4
RCV_R2_PASSIVE_CALL_SUCCEEDED : 1
RCV_R2_PASSIVE_CALL_FAILED : 3
RCV_VPM_ACTIVE_CALL : 39
RCV_VPM_ACTIVE_CALL_SUCCEEDED : 11
RCV_VPM_ACTIVE_CALL_FAILED : 28
RCV_VPM_PASSIVE_CALL : 18
RCV_VPM_PASSIVE_CALL_SUCCEEDED : 15
RCV_VPM_PASSIVE_CALL_FAILED : 3
}
The above information indicates the total number of the CC, R2 signaling in the RCV
module and the call packets of each VPM module, the number of successful call
packets, the number of the failed call packets. Using the other parameters (such as CC,
IPP, VPM, etc), it will display the statistic information in corresponding module.