Filter
Top Products
User Manual - Configuration Guide (Volume 3)
Versatile Routing Platform
Chapter 4
GK Client Configuration
4-2
interface. Only after one interface is specified as H.323 gateway interface, can the
function of CK Client be activated and can GK Client register to GK Server.
Please perform the following configurations in interface configuration mode.
Table VC-4-1 Specifying One Interface as H.323 Gateway Interface
Operation Command
Specify one interface as H.323 gateway interface h323-gateway voip interface
Cancel one interface as H.323 gateway interface no h323-gateway voip interface
By default, no interface is specified as H.323 gateway interface.
4.2.3 Activating or Deactivate GK Client Function
Only when one interface is successfully configured as H.323 gateway interface, can
GK Client function be activated. When the H.323 gateway interface is re-specified or
the relevant parameters (such as gateway alias and corresponding Gatekeeper name)
of other gateways are modified, you should activate GK Client function anew, so that
the information related to Client stored in GK Server is updated timely.
Please perform the following configurations in global configuration mode.
Table VC-4-2 Activate or Deactivate GK Client Function
Operation Command
Activate GK Client function gateway
Deactivate GK Client function no gateway
By default, GK Client function is deactivated.
4.2.4 Configuring Gateway Alias
Gateway alias is used to register at GK Server and identify gateway. One gateway can
have only one alias.
Please perform the following configurations in interface configuration mode.
Table VC-4-3 Configure Gateway Alias
Operation Command
Configure gateway alias h323-gateway voip h323-id namestring
Delete gateway alias no h323-gateway voip h323-id [ namestring ]
By default, the gateway alias is blank, i.e. no gateway alias configured.
4.2.5 Configure the GK Server Name and Address
When the GK Client of the router is activated, GK Client will automatically register the
relevant information of the gateway to GK Server. Therefore, it needs to configure