Filter
Top Products
User Manual - Configuration Guide (Volume 3)
Versatile Routing Platform
Chapter 3
E1 Voice Configuration
3-14
Recv_R2_Alert_AP_ALERTING : 0
Recv_R2_Alert_ELSE : 0
Recv_R2_Unknow : 0
}
The packets above show the interactive information between RCV module and R2
signaling, including the successful and failed number of the packets sent about the
connection request acknowledgement, the successful and failed number of the packets
sent about the activation acknowledgement, the number of the packets sent about
onhook and offhook, the number of the connection request packets received, the
number of the activation packets received, the number of the packets received about
release, alert, unknown and etc.
5) Show the call statistics of R2 signaling
Quidway# show r2 call-statistics
r2 signalling call statistics
30 drop from state TK_BLOCKED_BY_PEER
1 drop from state TKI_WAIT_CALLED_NUM
2 drop from state TKI_WAIT_VPU_ACTIVE_ACK
2 drop from state TKI_CALLED_ONHOOK
1 drop from state TKO_SEND_CALLED_NUM
2 drop from state TKO_RELEASE_GUARD
The above packets show the call statistics related to R2 signaling: the block of the
opposite end causes the drop of 30 calls; waiting for the caller number causes the drop
of 1 incoming call; waiting for the activation acknowledgement of the voice channel
causes the drop of 2 incoming calls; the onhook of the called number causes the drop
of 2 incoming calls; sending the called number causes the drop of 1 outgoing call;
releasing guard signal causes the drop of 2 outgoing calls.
6) Show the related information of VoIP
Quidway# show voip down-queue 5
V = 0,I = 0,P = 0,C = 0,E = E1VI_NULL_EVENT, B = 0
V = 0,I = 1,P = 0,C = 0,E = E1VI_NULL_EVENT, B = 0
……
V = 0,I = 255,P = 0,C = 0,E = E1VI_NULL_EVENT, B = 0
E1VI board 5 down interrupt queue is empty :
The above packets show the contents of the downstream interrupted queue between
E1 voice board and router motherboard: V denotes valid bit, I is the serial number, P
port number, C channel number, E event, and B blocked bit. The packets shown by
show voip up-queue
is the same as that of
show voip down-queue
.
Quidway# show voip version 0
[Slot 1] VI_NULL Hardware Version is 1.0, Driver Version is 1.0
The packets above show the hardware version and driver version of VI board.
III. debug Commands Related to E1 Voice
Please use the following debug commands in privileged mode for monitoring and
maintenance.