Filter
Top Products
ThurayaIP Satellite Modem User Guide 3
STEP 1: SIM INSERTION
1. Unpack the modem and
accessories. Your service provider
will have provided you with a SIM
card.
2. Insert SIM provided by your Service
Provider into the SIM holder inside
the battery compartment as shown. SIM Insertion Orientation
3. To close the battery door, hook the battery door tab under the
edge of the large opening in the enclosure near the data
connector ports. Firmly press the battery door into the opening. The
seal around the battery door should snugly fit between the door and
the enclosure with no pinch points visible. Once a good seal has
been made, screw the retaining fastener into the enclosure until
hand tight.
STEP 2: POWER CONNECTION AND BATTERY CHARGING
1. The ThurayaIP ships with the battery preinstalled;
however, if needed, install the battery in the
compartment pictured in Step 1.
2. Plug in Power cable and charge the battery for at
least three hours.
DC Power Jack
STEP 3: OBTAIN INITIAL GPS USING THE ThurayaIP
1. Put the ThurayaIP outside on a flat surface with a clear view of the
sky away from building, trees and other obstructions.
2. Power up Satellite Modem by pressing the Power button.
3. Once powered up, ThurayaIP will automatically attempt to locate
itself using GPS. This may take up to five minutes. The small GPS
satellite icons on the display (shaded area in the picture below)
show how many GPS satellites are in view at any given time. You
need all three satellite icons to be on solidly to obtain a GPS fix. If
any are missing or flashing then the GPS signal is being blocked.
GPS Satellite Icon Location on Display