Hughes ThurayaIP Modem User Manual


 
16 ThurayaIP Satellite Modem User Guide
to re-enter any configuration information supplied by your Service
Provider. You must enter the security code to complete the reset.
Current Settings
: provides the current communications parameters.
Software Version
Interface Mode
Public Network IP Address
Private Satellite Modem IP Address
Modem International Mobile Equipment Identity (IMEI)
Satellite Modem Media Access Control (MAC) Addresses.
STATISTICS SCREEN
This screen provides you with an estimate of your data usage. Data
usage figures are obtained by counting the bytes in the IP packets
received by and sent from the ThurayaIP terminal. You can view both
“since power on” (per session) and “Cumulative” (lifetime) data usage
counts. To reset the data counters of a session, simply select the reset
button for either transmit or receive and click the Apply button.
Statistics Screen
Note: The data usage figures provided on the screen are
estimates only. This feature is not tied into the actual billing
system. Hughes assumes no liability if differences are found
between data usage figures and your actual bill.