Hughes ThurayaIP Modem User Manual


 
ThurayaIP Satellite Modem User Guide
iii
In the vicinity of blasting work and in explosive environments
Never use ThurayaIP where blasting work is in progress.
Observe all restrictions and follow any regulations or rules.
Areas with a potentially explosive environment are often, but
not always, clearly marked. Do not use ThurayaIP while at a
petrol filling station. Do not use near fuel or chemicals.
Qualified service
Do not attempt to disassemble your ThurayaIP. ThurayaIP
does not contain consumer-serviceable components. Only
qualified service personnel may install or repair equipment.
Batteries and accessories
Use approved batteries (HNS P/N 3500108-0001) and
accessories only. Use of non-approved accessories may result
in loss of performance, damage to ThurayaIP, fire, electric
shock or injury.
AC Mains power adapter (HNS P/N 3500114-0001) is for indoor
use only. It has an indoor operating temperature range of -
10ºC to +55ºC and provides an output voltage of 12 VDC.
The storage capability of the battery decreases when
operated below 0ºC. If the battery is charged at too high a
temperature, this will be indicated on the LCD display.
Battery Door
To ensure safety, ensure that the battery door is properly
closed and latched at all times during operation. To close the
battery door, hook the battery door tab under the edge of the
large opening in the enclosure near the data connector ports.
Firmly press the battery door into the opening. The seal around
the battery door should snugly fit between the door and the
enclosure with no pinch points visible. Once a good seal has
been made, screw the retaining fastener into the enclosure
until hand tight.
Connecting devices
Never connect incompatible products. When connecting
ThurayaIP to any other device, read the device’s User Guide
for detailed safety instructions.