IBM 1483DSV Personal Computer User Manual


 
3-14 701344-003
Setup Menus, Controls, and Indicators
Data Entry Keyboard
(Native Mode Data Entry Keyboard)
APL Keyboard
(Native Mode APL Keyboard)
User Define - 01
(Native Mode Typewriter – Controller Keyboard Definition Utility required)
User Define - 02
(Native Mode Typewriter – Controller Keyboard Definition Utility required)
User Define - 03
(Native Mode Typewriter – Controller Keyboard Definition Utility required)
User Define - 04
(Native Mode Typewriter – Controller Keyboard Definition Utility required)
User Define - 01+
(Native Mode Data Entry – Controller Keyboard Definition Utility required)
User Define - 02+
(Native Mode Data Entry – Controller Keyboard Definition Utility required)
User Define - 03+
(Native Mode Data Entry – Controller Keyboard Definition Utility required)
User Define - 04+
(Native Mode Data Entry – Controller Keyboard Definition Utility required)
To change the keyboard selection, highlight Keyboard Type on the Offline Keyboard
menu and press Enter until the required selection is displayed.
Numeric Lock
Note: Check with the system operator before changing this value.
The Numeric Lock restricts the characters that can be keyed into a designated numeric
field.
To enable the numeric lock, highlight Numeric Lock and press the Enter key to toggle
the feature On (default value) or Off.
Changing the Keyless Password
You can modify the password for the Electronic Security Lock by doing the following:
1) Move the pointer to the Change KEYLESS Password prompt and press Enter.
2) You are then prompted to input the current password. As each keystroke is input,
an * is displayed in the results column. If an incorrect password is input, password
prompts are removed. To retry, press Enter to restore the prompt.
Note: The default password as shipped or after RESET NVRAM is OFF. OFF
disables the electronic keylock when online.