Filter
Top Products
3-18 701344-003
Setup Menus, Controls, and Indicators
Figure 3-8. Programmable Setup Strings for Prints Screen
Host Addressable Print
The host addressable print feature enables the host to send print requests to the 1483’s
attached printer. LU2 (screen) prints are always formatted by the display according to
the printer menu selections.
To enable or disable host addressable print, highlight Host Addressable Print and press
the Enter key to toggle between Ye s (the default) and No. Host addressable print cannot
be enabled if an Emulate 88-key keyboard option is selected on the Offline Keyboard
menu (Figure 3-6 on Page 3-12), or if COAX is selected as the Printer on the Offline
Printer menu.
Controllers that support host addressable print are the MTX/MTC 1174 Network
Controller, Release 7.0 and higher, and the Memorex Telex 1374 Control Unit, Release
6.0 and higher.
Note: The host addressable print feature supports LU1 SCS commands.
If host addressable print is enabled, the Adjusting Line Feed and Adjusting Form
Feed options are displayed.
Printer Format Control
The printer format control feature enables the user to specify whether the formatting of
LU1 or LU3 will be handled by the display.
Programmable Setup Strings for Prints
1st Position 00 17th Position 00
2nd Position 00 18th Position 00
3rd Position 00 19th Position 00
4th Position 00 20th Position 00
5th Position 00 21st Position 00
6th Position 00 22nd Position 00
7th Position 00 23rd Position 00
8th Position 00 24th Position 00
9th Position 00 25th Position 00
10th Position 00 26th Position 00
11th Position 00 27th Position 00
12th Position 00 28th Position 00
13th Position 00 29th Position 00
14th Position 00 30th Position 00
15th Position 00 31st Position 00
16th Position 00 32nd Position 00
Use UP/DOWN Cursor Keys to select position to change
Use LEFT/RIGHT Cursor Keys to alter data at selected position
Use ENTER Key to make changes and return to previous menu
Use RESET Key to return to previous menu
Use CLEAR Key to set all positions to 00