Filter
Top Products
loop identifier (LID) (continued)
setting to get status of loop 15, 16
LTO Data Compression (LTO-DC) algorithm 1
M
maintenance functions
clearing error code log 35
converting an FMR tape to a scratch tape 34
copying drive dump to tape 31
creating FMR tape 30
displaying error code log 34
forcing drive dump 30
inserting cartridge into tape drive 35
selecting 28
updating firmware from FMR tape 29
maintenance mode
exiting 25, 37
placing the tape drive in 25, 27
selecting a maintenance or diagnostic function 25,
28
manual rewind tool, ordering 81
manually removing a tape cartridge from the drive 73
media, using 41
media-related errors 69
models of Ultrium Tape Drive 1
mounting tape drive into an enclosure 20
O
operating systems, supported
for Fibre Channel drive 3
for SCSI drive 2
operating the tape drive 23
ordering tape cartridges and supplies 50
P
placing the tape drive in maintenance mode 25, 27
power
connecting to tape drive 21
hot-pluggable connection 21
specifications 7
powering off the enclosure 11
problems, resolving 53
pSeries server
obtaining error information from 60
supported operating system
Fibre Channel drive 3
SCSI drive 2
supported by Fibre Channel drive 3
supported by SCSI drive 2
R
read/write capability 2
rear view
Fibre Channel drive 11
SCSI drive 10
recording method, of tape drive 2, 42
relative humidity specifications
for media 49
for tape drive 7
removing the tape drive from an enclosure
Fibre Channel drive 5, 72
SCSI drive 3, 71
resetting the tape drive
Fibre Channel drive 3, 25
SCSI drive 5, 25
RS-422 interface
connecting to the tape drive 21
feature of tape drive 1
updating firmware from 38
RS-422 wrap test, running 33
RS/6000
obtaining error information from 60
supported operating system
supported by Fibre Channel drive 3
supported by SCSI drive 2
RS/6000 SP
supported operating system
supported by Fibre Channel drive 3
supported by SCSI drive 2
S
safety notices, how to use v
SAN, supported components 1, 3
SCSI drive
assigning an address 2
connecting tape drive to bus 22
fixing bus errors 65
installing 3
rear view 10
removing 3
resetting 3, 25
setting the ID 14
supported servers and operating systems 2
terminating 15
type of connector 1
type of interface 1
updating firmware from 38
wrap test, running SCSI 32, 33
wrap tool, ordering 81
SCSI wrap test, running 32
security of data on cartridge 49
sense data, using 59
server
configuring tape drive to 22
resolving errors 65
supported
for Fibre Channel drive 3
for SCSI drive 2
updating firmware from 38
servicing the tape drive 24, 71
setting the Loop ID 15
setting the SCSI ID 14
setting the write-protect switch 43
single-character display 23, 26
soft addressing 4
Index 105