Filter
Top Products
TapeAlert Flags Supported by the Ultrium Internal Tape Drive
Flag
Number
Flag Description Action Required
37 Drive voltage Set when the drive detects that the
externally supplied voltages are
either approaching the specified
voltage limits or are outside the
voltage limits (see Table 2 on
page 7).
See error code 2 in Table 12 on
page 53.
39 Diagnostics required Set when the drive detects a failure
that requires diagnostics to isolate
the problem.
See error code 6 in Table 12 on
page 53.
Appendix B. TapeAlert Flags 85
|||
|
|
|
|