Filter
Top Products
Manually Removing a Tape Cartridge
If a tape cartridge fails to eject from the Ultrium Internal Tape Drive, you can
manually remove the cartridge. The following tools are required for the procedure:
v 2.5-mm allen wrench
v #3 Phillips screwdriver
v Small-blade screwdriver or potentiometer-setting tool
v Flashlight (optional)
Attention: Before performing this procedure, note the following:
v This procedure may damage the tape cartridge. If you use this procedure, you must
replace the stuck tape cartridge after removing it and copying its data to another cartridge.
If you choose to return the drive and the stuck tape cartridge to your reseller for
maintenance, the tape cartridge will be scrapped.
v The use of a power screwdriver to perform this procedure can destroy the tape.
v Never touch the head or electronic components within the drive. Touching may cause
contamination or damage by electrostatic discharge.
Chapter 7. Servicing 73
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|