Filter
Top Products
Table 12. Codes for Error Conditions and Informational Messages for the Ultrium Internal Tape
Drive (continued). The single-character display clears if you power-off the drive.
Code Cause and Action
E Informational message. The tape drive’s Fibre Channel port has been placed offline by another
device or by an operator. This code is set when the Offline command is received from another
device on the Fibre Channel interface. Determine why the device at the other end of the Fibre
Channel (the server, switch, or other device) placed the drive offline.
The drive is placed online when it receives the Online command from the Fibre Channel interface.
After a reset, the drive comes online.
F The tape drive determined that no light is being received over the Fibre Channel. See “Fixing Fibre
Channel Errors” on page 67.
The error code clears when the drive detects light or when you place the drive in maintenance
mode.
58 IBM Ultrium Internal Tape Drive
||
|
|
|
|
|
||
|
|
|