Filter
Top Products
23
Configuring and Managing the Switch
CHAPTER 2
To create an SVLAN
1 Determine the ports you want to group together.
2 Type the command:
set-sec-vlan all 3-4-5
This command groups port 3, 4, and 5 as an SVLAN immediately
and saves the entry in NVRAM. Replace all with nvram to save
the entry without changing it immediately or with run to change
the entry now without saving it.
3 To display a summary of saved SVLANs, type
get-svlan-tbl nvram
Any SVLANs created with the nvram or all option are
displayed.
To create a VBD
1 Determine the ports you want to group together.
2 Type the command:
set-vbc-domain run 3-5-6-7
This command groups port 3, 5, 6, and 7 as a VBD temporarily
(only until the next reset or power down). To save the entry and
have it take effect now, replace run with all.
3 To display a summary of saved VBDs, type
get-vbc-tbl nvram