Filter
Top Products
60
CHAPTER 3
Intel Express 100BASE-TX Switching Hub
6 If the FC/FD LED shows excessive activity, see Chapter 1 for
recommendations on dealing with excessive flow control.
7 Make sure that the equipment attached to the switch is properly
configured. If the CLSN LED is on continuously, you may have a
problem with an adapter on the segment.
8 Use the Console Manager to check the switch’s status. Use the
sys-stat command to check the overall system status and the get-
port-cfg command to check the status of each port.
If you encounter any situations or problems you cannot solve, get the
following information:
• The serial number of the Express Switching Hub printed on the
back side of the switch.
• The firmware revision number displayed in the Console Manager
sys-stat message.
• The configuration of the equipment connected to the switch.
• The sequence of events leading up to your problem.
• Actions you have already taken.
If you call Intel Customer Support, you have 90 days of free support
after your first call. Thereafter, Intel offers several pay-for-support
options.