Filter
Top Products
27
Configuring and Managing the Switch
CHAPTER 2
logout
Ends the local Console Manager session and any Telnet session and
displays the login prompt for a new session.
set-prompt
set-prompt <
new_prompt
>
Sets the command-line prompt for the Console Manager to a more
meaningful prompt, such as the location of the switch or the name of
a workgroup. The default prompt is SYS_console>.
SYS_console> set-prompt R&D_grp>
CLI prompt change in the NVRAM OK
R&D_grp>
set-passwd
Changes the console password. The system first prompts you for the
old password. You can then type a new password and type it again for
verification. Passwords are never shown onscreen.
SYS_console> set-passwd
Enter old password:
Enter new password:
Enter new password again:
CLI running password changed
CLI password change in NVRAM OK
Password changed!
If you enter the old password incorrectly or fail to verify the new
password correctly, the password isn’t changed.
System commands
The system commands allow you to display and set system-related
parameters.