Filter
Top Products
37
Configuring and Managing the Switch
CHAPTER 2
add-trap
add-trap <
IPaddress
> <
trap-community
>
Enters the IP address of the receiving station and the trap community
string that appears in the trap message. The trap table can contain up
to five receiving stations
SYS_console> add-trap 129.1.1.76 rnd
Entry 129.1.1.76 - rnd added
SNMP TRAP TABLE
===============
IPADDR COMMUNITY
-----------------------------------------------
129.001.001.065 ----------- public
129.001.001.007 ----------- trapcomm
129.001.001.076 ----------- rnd
-----------------------------------------------
del-trap
del-trap <
IPaddress
>
Removes a station from the trap table.
SYS_console> del-trap 129.1.1.7
Entry 129.1.1.7 - trap comm deleted
Switching database commands
This section contains instructions for managing the switching
database with the Console Manager.
The switching database, also called a learn table or address table,
consists of 1024 entries. Each active entry contains the information
relevant to a network node, identified by its Ethernet MAC address.
Each entry contains the following information:
Lock. If on (denoted as a +), the entry is a static entry and isn’t
deleted by the switch aging process. If off (denoted as a -), the entry is
a dynamic entry that’s automatically deleted if the workstation is not
active during the aging time period.