Filter
Top Products
51
Configuring and Managing the Switch
CHAPTER 2
get-colls-cnt
get-colls-cnt <
port-number
>
Displays the Ethernet collision statistics for each port. This is nearly
identical to the Ethernet-like collisions statistics group of the Ethernet
MIB and shows the collision count distribution for this port. If a
packet still collides on the 16th count, the packet is retransmitted.
SYS_console> get-colls-cnt 1
Ethernet Collision Distribution for port 1
==================================================
1 collision count : 2234
2 collision count : 121
3 collision count : 0
4 collision count : 0
5 collision count : 0
6 collision count : 0
7 collision count : 0
8 collision count : 0
9 collision count : 0
10 collision count : 0
11 collision count : 0
12 collision count : 0
13 collision count : 0
14 collision count : 0
15 collision count : 0
16 collision count : 0
==================================================
get-rmon-cnt
get-rmon-cnt
<port
>
Displays the remote monitoring (RMON) statistics group 1 counters
for
port
.
SYS_console> get-rmon-cnt 3
Ethernet RMON Counters for port 3
====================================================
etherStatsOctets : 890094309
etherStatsPkts : 1504371
etherStatsBcastPkts : 14024
etherStatsMcastPkts : 3834
etherStatsCRCAllignPkts: 9
etherStatsUndersizePkts: 18
etherStatsOversizePkts : 0
etherStatsRuntPkts : 6
etherStatsJabberPkts : 0
etherStatsCollisions : 0
NOTE
Collisions on the first few
counts are normal. However,
if collisions occur past the
10th count, you should
reconfigure your network so
devices that mainly talk to
each other are on the same
segment.